Sensor Echo is one of six standard Action Bar actions available on all starships with the Cloak Action.
A ship can only perform a Sensor Echo Action if it is currently Cloaked. Performing a Sensor Echo Action signifies that the Cloaked ship is actually in a different position than the enemy ship's sensors were able to detect.
- Take the 1 or 2 Maneuver Template
- Place one end of the template against either the left or right side of the ship's base. The template may be placed anywhere along the side of the ship's base as long as no part of the template goes beyond the front or back edge of the base.
- Holding the template firmly in place, lift the ship off the play surface. Then place the ship at the opposite end of the template, making sure no part of the template goes beyond the front or back edge of the base. The front of the ship must face the same direction it was facing when it started the Sensor Echo.
A ship cannot perform a Sensor Echo if this would cause it's base to overlap with another ship or similar obstruction.